Description
Siglent SPD3303X-E Programmable Bench DC Power Supply
The SPD3303X-E is a 2x 0-32V (3.2A), 2.5V/3.3V/5.0V (3.2A), 220W Bench Programmable DC Power Supply. Siglent’s SPD3000X Series Programmable Linear DC Power Supply has a 4.3 inch TFT-LCD display, supports Remote Programming and has a Real Time Wave Display. The 3000X family has three isolated outputs; two adjustable channels and one selectable channel from 2.5V, 3.3V, and 5V. It also has output short and overload protection and can be used in production and development.
- 3 Independently controlled and isolated outputs: Two 32V/3.2A, one 2.5V / 3.3V / 5V / 3.2A x 1, total 220W
- 4 digital Voltage/4 digit Current Display,
- Minimum Resolution: 10 mV/10 mA
- Timing function provides programmed output steps
- 4.3 inch true colour TFT-LCD 480 X 272 display
- 3 types of output modes: independent, series (60V max), and parallel (6.4A max)
- 100/120/220/230V compatible design to meet the needs of different power grids
- Intelligent temperature-controlled fan effectively reduces fan noise
- Clear graphical interface, with waveform display function
- Five internal groups of system parameter save/recall, supports data storage space expansion
- Free PC software; Easypower. Also supports remote programming and includes a LabView driver
Siglent SPD3000C/X/X-E DC Power Supply Comparison Table
| Model | Output Voltage | Output Current | Power | Rack/Bench | Control | Display |
|---|---|---|---|---|---|---|
| SPD3303C | CH1: 0-32V CH2: 0-32V CH3: 2.5V/3.3V/5.0V | 0-3.2A 0-3.2A 0-3A | 220W | Rack / Bench | USB Device | 4 digit Voltage, 3 digit Current |
| SPD3303X | CH1: 0V-32V CH2: 0V-32V CH3: 2.5V/3.3V/5.0V | 0 – 3.2A | 220W | Rack / Bench | USB Device, LAN | 5 Digits Voltage, 4 Digits Current |
| SPD3303X-E | CH1: 0V-32V CH2: 0V-32V CH3: 2.5V/3.3V/5.0V | 0 – 3.2A | 220W | Rack / Bench | USB Device, LAN | 4 Digits Voltage, 3 Digits Current |
Product Images
Product Videos
Siglent SPD3000X-E Datasheet
Ellis Simon (verified owner) –
I am an amateur radio and electronics enthusiast, who likes building RF circuits. I bought The Siglent SPD3303X-E for use on my workbench, replacing a much cheaper PSU which I found to be electrically noisy and difficult to set precisely.
I am absolutely delighted with my new power supply. It cost a little more than an amateur would normally spend on such a device but it is such a joy to use, being easy to set and the display being easy to read. It is not my first piece of test equipment bought from Telonic and it won’t be my last!
I am most impressed with it and I can highly recommend it.
pmusic (verified owner) –
Needed to develop and test a high-gain pre-amp and power amp combination to drive a hearing aid induction loop system for a relative, my previous (Chinese switching) PSU was quite noisy with switching spikes and ripple – so I bit the bullet and bought a Siglent SPD3303X-E.
.
Am absolutely delighted with it, superb control of voltage and current (the current limiter works well -don’t ask) and the noise is negligible (my Siglent ‘scope can barely see it).
.
Am impressed and very pleased, although more than I wanted to pay, it seems you do get what you pay for – highly recommended.